Feeds:
Posts
Comments

Posts Tagged ‘Ten Commandments’

Since my last post showing progress on Canute Road Quay, with respect to the concrete road area and inset trackwork along with making the grass ‘grow’  I have been busy completing the rest of the buildings and adding a mix of details.

The left hand front office building is yet to be affixed to the layout

The two main front buildings have been assembled from the excellent laser cut card components from LCut Creative these have now been initially painted and external details such as gutters and downpipes added from a mix of Peco LK-78 buifdings details pack and Wills SS46 Buildings Pack A. These buildings are not yet permanently affixed to the layout as I am still to add the internal details and also some lighting.

The main warehouse loading platform also has a representation of its underside wooden support beams. Photo taken before the gantry was fitted

I gave the LCut Creative buildings a coat of Humbrol grey acrylic primer prior to dry brush painting the brickwork using a pallet of  brick work colours from Precision Paints mixed with a little dirty black and also picked out slightly different brickwork such as the window brick arches a slightly lighter colour.

The gantry and A frame has been added to the right hand warehouse

The main warehouse loading platform has been made using Wills floorboard building sheets rather than the LCut Creative card items as I was making the platform quite long and the Wills plastic sheets are larger and stronger. This has been painted a weathered greyish brown colour.

To give access to the upper floor loading doors I have created a gantry hoist supported on the quayside by an ‘A’ Frame. The block and tackle / pulley would run on the smaller section ‘H’ girder mounted below the main cross girder, to either lift items to and from open wagons and or in theory the girder would be cantilevered over the quayside to lift items from moored vessels.

Another view of the warehouse and freelance gantry hoist

I have made this somewhat freelance design from scratch using two different sizes of brass ‘H’ section soldered together with some corner bracing details added from thin brass sheet embossed with a number of rivets.

The engine shed nestles in the roar corner of Canute Road Quay

The engine shed tucked away in the back right hand corner assembled from Skytrex Model Railways resin parts is now complete and suitably painted. The inside floor of the shed has been painted to represent a concrete floor and outside the shed a mix ash, using real ash from my wood burning stove, ballast and coal around the coaling platform, a Hornby Scaledale product,  have been glued in place using the usual method of diluted PVA glue. The water crane is a Kernow Model Centre commissioned SR style made by Bachmann Scenecraft.

USA tank No 72 crosses the quayside access road

A few people and black wing gulls have been suitably positioned around the layout from Langley Models, I have also used their etched drains and drain covers in suitable places. The SR barley twist post style gas lamps, from Gaugemaster, are yet to be wired in although the transformer, voltage regulator and input wiring is already place to do so.

The end of the right hand warehouse and loading platform

Other details items such as wooden crates, oil drums, sacks and fish crates have been added from cast plaster items from Ten Commandments suitably painted.

In my last post about Fisherton Sarum attending the Epsom and Ewell exhibition last weekend, Canute Road Quay makes its first almost public appearance this coming Sunday at an RMweb forum members event in Taunton. I would like to thank all those readers of this blog who came by Fisherton Sarum at the excellent Epsom and Ewell exhibition, it was good to speak to you all. On the whole from the layouts perspective the show went well despite a couple of electrical niggles, and I am looking forward to hopefully a good day with Canute Road Quay on Sunday.

An overall view of Canute Road Quay showing its curtrent state of progress

Read Full Post »

%d bloggers like this: