Feeds:
Posts
Comments

Posts Tagged ‘Skytrex model railways’

Since my last post showing progress on Canute Road Quay, with respect to the concrete road area and inset trackwork along with making the grass ‘grow’  I have been busy completing the rest of the buildings and adding a mix of details.

The left hand front office building is yet to be affixed to the layout

The two main front buildings have been assembled from the excellent laser cut card components from LCut Creative these have now been initially painted and external details such as gutters and downpipes added from a mix of Peco LK-78 buifdings details pack and Wills SS46 Buildings Pack A. These buildings are not yet permanently affixed to the layout as I am still to add the internal details and also some lighting.

The main warehouse loading platform also has a representation of its underside wooden support beams. Photo taken before the gantry was fitted

I gave the LCut Creative buildings a coat of Humbrol grey acrylic primer prior to dry brush painting the brickwork using a pallet of  brick work colours from Precision Paints mixed with a little dirty black and also picked out slightly different brickwork such as the window brick arches a slightly lighter colour.

The gantry and A frame has been added to the right hand warehouse

The main warehouse loading platform has been made using Wills floorboard building sheets rather than the LCut Creative card items as I was making the platform quite long and the Wills plastic sheets are larger and stronger. This has been painted a weathered greyish brown colour.

To give access to the upper floor loading doors I have created a gantry hoist supported on the quayside by an ‘A’ Frame. The block and tackle / pulley would run on the smaller section ‘H’ girder mounted below the main cross girder, to either lift items to and from open wagons and or in theory the girder would be cantilevered over the quayside to lift items from moored vessels.

Another view of the warehouse and freelance gantry hoist

I have made this somewhat freelance design from scratch using two different sizes of brass ‘H’ section soldered together with some corner bracing details added from thin brass sheet embossed with a number of rivets.

The engine shed nestles in the roar corner of Canute Road Quay

The engine shed tucked away in the back right hand corner assembled from Skytrex Model Railways resin parts is now complete and suitably painted. The inside floor of the shed has been painted to represent a concrete floor and outside the shed a mix ash, using real ash from my wood burning stove, ballast and coal around the coaling platform, a Hornby Scaledale product,  have been glued in place using the usual method of diluted PVA glue. The water crane is a Kernow Model Centre commissioned SR style made by Bachmann Scenecraft.

USA tank No 72 crosses the quayside access road

A few people and black wing gulls have been suitably positioned around the layout from Langley Models, I have also used their etched drains and drain covers in suitable places. The SR barley twist post style gas lamps, from Gaugemaster, are yet to be wired in although the transformer, voltage regulator and input wiring is already place to do so.

The end of the right hand warehouse and loading platform

Other details items such as wooden crates, oil drums, sacks and fish crates have been added from cast plaster items from Ten Commandments suitably painted.

In my last post about Fisherton Sarum attending the Epsom and Ewell exhibition last weekend, Canute Road Quay makes its first almost public appearance this coming Sunday at an RMweb forum members event in Taunton. I would like to thank all those readers of this blog who came by Fisherton Sarum at the excellent Epsom and Ewell exhibition, it was good to speak to you all. On the whole from the layouts perspective the show went well despite a couple of electrical niggles, and I am looking forward to hopefully a good day with Canute Road Quay on Sunday.

An overall view of Canute Road Quay showing its curtrent state of progress

Read Full Post »

I thought it was about time I posted an update on some progress on my new little timesaving / timewasting project Canute Road Quay. Since my last post here that spoke of the wiring commencing and the completion of the fiddle yard   and a slightly earlier one about the buildings and inset track starting to take shape progress has been ticking along.

The main wiring is completed on the underside. Black tape makes the approximate position of the track above.

The main wiring is completed on the underside. Black tape makes the approximate position of the track above.

Wiring

I am pleased to advise that all the main wiring has now been completed and fully tested with track feeds, points (Cobolt point motors), frog feeds and the Dingham electromagnets for uncoupling all working as they should.
I have added a couple of DROK voltage regulators, one for the Cobolt point motors to give a smooth 9V DC supply, as I have found that they work much better and quieter with such a regulated supply; and also one to control the voltage to the yet to be fitted street lamps and a few interior lights within some of the buildings,  enabling me to easily control the voltage to give the most appropriate brightness levels once installed.
It has been both fun and reassuring at this stage to be able to run a loco or two and shunt a few vans around.

crq_feb2017_5

The cork for the inset track is not complete and modelling clay used as the base of the remaining ground cover

Inset track and ground cover

The final layer of cork sheeting has been put in place in the areas where the track is inset and last weekend I made a start on the other terrain areas such as the areas just off the inset track, roadways and also to represent the basic earth / ash style unkempt ballast (rather than stone chips) of the non inset track areas, using air drying modelling clay.
To apply the clay I first apply a thin layer of PVA glue to the baseboard surface to assist with the clay keying to the baseboard top.  I then simply mold the clay in place using fingers and where required smoothing down with a little water, it’s a bit messy but the inner child in me finds it fun.

Looking the other way and one of the puddles can be seen between the loop tracks

Looking the other way and one of the puddles can be seen between the loop tracks

To give a few further points of interest I have created a few puddles in the lower lying areas between the loop tracks and also around the water crane on the shed road. These are simply small pieces of 20 thou clear plasticard painted black in the underside and fixed in place before shaping the puddle edges with the modelling clay.
The inset track areas will now be painted using textured paint from Green Scenes to represent concrete. In addition to their concrete textured paint I also intend to use their tarmac version for the roadway in front of the public house going off to the rear of the layout and also their ‘yard filth’ and ‘general muck’ for some of the other terrain areas, once painted these areas will also receive undergrowth and static grass to complete the scene.  The coaling area in front of the small locomotive shed will also see real coal (as nothing looks more like coal than coal) and ash (real ash from my word burning stove) used to give further texture and colour.

An overall view of the full 4 foot of the layout as it stands at the moment

An overall view of the full 4 foot of the layout as it stands at the moment

Buildings

The low relief buildings on the backscene (which itself will form the topic of a future post) the have now been glued into place after I added black plasticard to the rear and also some partitions between the floors and rooms so that it is not possible to just see right through the buildings, especially as I intend to have a couple of rooms, such as the lounge bar of the public house internally lit.
The walls for the engine shed from Skytrex Model Railways resin parts have been assembled and received an initial all over coat of red oxide colour plastic primer to be the base for the final painting of the brickwork.

A front on view of Canute Road Quay, with the ground cover now awaiting painting

A front on view of Canute Road Quay, with the ground cover now awaiting painting followed by various forms of undergrowth

More updates to follow soon…

 

Read Full Post »

A weekend at home for a change has seen some progress made on my new little timesaving / timewasting project Canute Road Quay. This post brings you up to date with that progress, further buildings have been added and a start made on the inset quayside trackwork.

The 'Waterloo Tavern' has been added which is a Bachmann Scenecraft low relief building

The ‘Waterloo Tavern’ has been added which is a Bachmann Scenecraft low relief building

Firstly taking on board an excellent suggestion made by a friend and fellow Southern enthusiast Ian (Olddudders) on RMweb  of adding a pub into the scene to be somewhere to quench the thirst of, and allow some of the cash be spent on pay day of, the hardy dock workers; I have therefore sourced and added a couple more suitable Bachmann Scenecraft low relief buildings next to the bonded warehouse.

A further view of the low relief buildings including what is now a stores building

A further view of the low relief buildings including what is now a stores building

The first one being the ‘Waterloo Taven’ and another being a stores building that was originally a garage, but I have already removed the petrol pump and branding but haven’t touched up the paint work up yet. A small alleyway is between these buildings behind the gate.
I have also removed the platform from the bonded warehouses to lower them in height and also due to the fact that I am locating then facing on to a roadway rather railway line.

Work on the insert trackwork has started as well as the LCut Creative office building

Work on the insert trackwork has started as well as the LCut Creative office building

I have made a start on the inset quayside trackwork, which will represent a concrete finish once complete. Firstly I added check rails inside the running rails, by super-gluing lengths of rail to the sleepers. The first layer of 2.5mm cork has been glued down either side of the track, and also a strip added between the check rails. The next stage will be add a second layer of 1.5mm cork on top of the base layer that will also extend right up to the outside surface of the running rails totally covering the sleepers. Any gaps will be filled using filler before scribing section lines to represent the panels of concrete and expansion gaps then painting a weather concrete and weeds and such like added.

A view of the work in progress on the front quayside warehouse and loading platform

A view of the work in progress on the front quayside warehouse and loading platform

The front buildings representing a quayside office building and a larger warehouse and loading platform have also started to take shape. For these building I am using laser cut card components from LCut Creative. I have been very impressed with the quality and detail of these kits, they assemble very easily, using PVA woodglue and as they come in sections of common key dimensions they are easily adaptable to suit the location, as I have done here using a number of different kits combined to give the effect I am after.

The small engine shed and coal stage can be seen in the back corner of Canute Road Quay

The small engine shed and coal stage can be seen in the back corner of Canute Road Quay

These are currently still in sections with the upper floor of the warehouse building and the loading platform just being rested in place until I have added the internals floors and partitions, but the effect they give is starting to take shape.

In the very back corner can be seen the small engine shed with its Hornby Scaledale coal stage and Kernow Model Rail Centre SR style water crane, the shed itself is taking shape from a resin kit from Skytrex Model Railways.

I hope to make further progress over the Christmas break; with continued progress on the buildings, inset trackwork and the fixing of an overcast sky photographic backscene; and will keep you suitably posted via this blog.

Read Full Post »

%d bloggers like this: