Feeds:
Posts
Comments

Posts Tagged ‘SER’

This is the sixth in a series of ‘Making Quay Changes’ posts with the Canute Road Quay being transported to either a different location or era or both.  It follows my Making Quay Changes #1 post moving the scene Eastwards, and then back to Southampton with my Making Quay Changes #2 post but in the 1950s ,  #3 post set in the 1920/30s, #4 Being Industrious and #5 the 07 diesels take over. We now move to the South East with ex SECR motive power being utilised.

The P Class No.1558 from Hattons shunts at the quay

The T Class No. 1604 0-6-0T simmers in the background

The P class and T class meet on the Quay and shows the diminutive size of the P class

The LCDR T Class arrives as the quay.

The SER 0-40CT No. 1302 waits its next duty

The P class No. 1558 is about to depart

A busy moment at the quay

Although my usual modelling genre, as regular readers will know, is the Southern Railway between 1946 and 1949, however due to Canute Road Quay has very few visual references to either period or location (yes there are a couple, but hey…) It therefore allows me to change the location and era with different rolling stock, vehicles and details.

For this post we have stayed at Canute Road Quay‘s usual time frame but moved its location slightly. Having deliberately when building Canute Road Quay left the vehicles and other details such as crates, sack stacks and oil drums etc. loose, it enables them to be both be moved around, to give some variety in photographs, and or replaced with other items to different periods.

In this case Canute Road Quay‘s has been transported further to the South East, perhaps through squinted eyes it could on the Medway at Rochester, or or the Channel coast at Richborough Port or Newhaven Harbour perhaps…

The steam locomotives include the Hattons ex SECR P class 0-6-0T, an ex London, Chatham and Dover Railway Kirtey T Class 0-6-0T and even my South Eastern Railway 0-4-0CT crane tank makes an appearance.

The T class 0-6-0T were a class of ten locomotives introduced by the LC&DR (prior to the formation of the South, Eastern and Chatham Railway in 1899) between 1879 and 1893 specifically for shunting duties, with appropriately one of the class being initially used at Dover Docks. Although withdraws started in 1932 two of the class  1602 and 1604 (as my model) lasted until July 1951 and November 1950 respectively. My model is white metal and built from a Q Kit.

The SER 0-4-0CT crane tank number 1302 as per my model, was one of two built for the SER by Neilson in 1881. Like the T class she had worked at Dover Docks and also Richborough although she saw out most of her life at Lancing and Stewarts Lane. She was withdrawn in July 1949 and scrapped at Ashford. My model is built from a South Eastern Finecast white metal kit.

I hope you enjoy this post, the next ‘Making Quay Changes’ post with Canute Road Quay may or may not be set in its usual location, so once again, where and what era will it be…?

 

 

Read Full Post »

Built between 1900 and 1908 the eventually 109 strong Wainwright C Class 0-6-0 tender locomotives were one of the first three new designs introduced after the creation of the South Eastern and Chatham Railway following the legal union of the South Eastern Railway and the London Chatham and Dover Railway. The class was long lived with only two not passing into British Railways ownership. The last members of the class were not withdrawn, mainly as a result of the Kent Coast electrification, until 1962 (although three  survived into departmental use as Ashford Works shunters until 1966).

With excellent riding qualities the C Class were often found on passenger and excursion duties as well as their primary role on goods trains throughout originally the SECR and subsequently the Eastern Section of the SR. Number 592 is now preserved on the Bluebell Railway.

Bachmann C Class in SR post 1937 livery

Bachmann first announced their intention to produce a C Class  in 2011. Initially three versions are now available and hitting the retailers:
31-460 as number 592 in SECR Lined Green as preserved on the Bluebell Railway
31-461 as number 1256 in post 1940 Southern Railway Black
31-462 as number 31086 in BR Black with Early Emblem

Bachmann have certainly done an excellent job in capturing the looks of these engines and the initial impression is very positive.

The lovely SECR livery. Picture courtesy and copyright A York

The SECR livery application  is extremely fine, pretty much second to none, capturing nearly all the intricate lining and lettering including the tiny SECR lettering on the tender axle boxes. The steam reverser however should also be lined but is in plain green on the model presumably due to limitations in the printing process. The other limitation of the livery application in model form is the finish of the brass dome does not quite match the highly polished original.

3/4 view from behind shows the tender detail and the cast metal coal load

Bachmann have also tooled for the correct taller original pattern chimney on the SECR livery version which is different to the other two releases.
I am sure many sales will / have occurred just because it looks so pretty.
On the post 1940 Southern black version illustrated here the lettering and numerals, shaded in green, are nicely applied and correct in that the numbers do not have the same inside black line as the lettering on the tender. They certainly look very comparable to my usual preferred use of HMRS decals for most of the SR post 1937 black locos in my fleet.

The underframe detail including the brakes, sandpipes and guard irons are all finely moulded including those on the tender. Brake rigging is supplied for the purchaser to fit to the locomotive and tender, although this is quite fiddly especially on the loco needing to take care around the sanding pipes.

The face of the C Class

The loco to tender coupling is a semi permanent fixed bar and is adjustable to shorten the gap between the loco and tender. The DCC plug location is in the tender so the wires between the loco and tender are connected via a small plug, very similar to that used by Hornby for a while now, which will make splitting the tender and loco apart if necessary much easier. It should be noted however that no pick ups are included on the tender itself which is a shame.

Bachmann’s usual use of a cast metal coal load helps give some weight to the otherwise quite light tender however if the load is removed it leaves a flat topped tender with a two locating holes rather than any representation of the albeit very small coal space, I assume that this is compromise to leave enough space inside the tender for the fitting of a DCC Sound speaker. I am not personally convinced by the coal effect this gives and will be adding a layer of real crushed coal once the loco is weathered.
On the all over black livery versions the fine details unlike that of the SECR livery are sometimes lost and some light weathering will actually help accentuate this detail.

The slight protrusion of the motor and gearbox in front of the firebox can be seen

The motor and drive is very well concealed within the firebox and it does protrude slightly forward of the front of the firebox, which is more noticeable on the SECR green version due to the prominence of the end of the polished boiler band but less so on the black versions. This does leave the correct daylight under the boiler but it is a shame that Bachmann have not included, unlike some recent models, any representation of the inside motion between the frames here as just a flat plate is visible.

Excellent detail and painting within the cab

A lovely wealth of detail is present  including lubricating and control pipework especially around the steam reverser, hand rails and lamp irons. The detail inside the open cab is excellent and Bachmann have recently upped their game with such detail including the painting and printing. Like some recent Hornby models there is even representation of the letting and needles on the pressure gauges. Curiously all versions have the protruding top of the firebox inside the cab painted in brass. Whilst this is likely to be correct for the SECR livery version I am not convinced it would have looked that way in later life as per the other livery variations.

As well as the brake rigging already mentioned for the purchaser to fit the model also comes with nicely moulded screw couplings one is factory fitted to the Loco and a spare for the tender if the tension lock coupling is removed; cab doors that will need to be glued in place as there does not appear to be any locating devices for them; and a nice set of fire irons for the tender. The only thing missing these days from the main manufacturer’s products are loco crew, but I assume that these ideally would need to be painted and would therefore increase costs too much.

Overall this model of the C Class is a sure fire winner and hopefully it will convince Bachmann to consider other such southern area pre grouping prototypes in the future.

Read Full Post »

%d bloggers like this: