Feeds:
Posts
Comments

Posts Tagged ‘SECR P class 0-6-0t’

There has recently been a flurry of activity in the Ready to Run world from various manufacturers / model commissioners and this post is a quick update on a number of models that I  had the chance to take a look at, run and photograph at the Hornby Magazine Great Electric Train Show (GETS) on their Twelve Trees Junction layout, that I was helping to operate last weekend. Further posts giving a more detailed photographic review of some of the production models about to be delivered will follow in due course.

Hornby H Class

Hornby H class No 1518 on Twelve Trees Junction

First announced  in September 2016 as being part of their 2017 range the ex ex SECR / SR Wainwright H class 0-4-4 tank is progressing well and the first of the production samples can be seen pictured left. No 31518 in lined black with late crest is Hornby catalogue number R3539 and is also pull push fitted. She ran very nicely on Twelve Trees Junction layout over the GETS weekend. Also being released are R3538 as No. 308 in full SECR livery, R3450 as No 1234 in lined olive green and No 31551 as part of a train pack with pull push set 602.

Hatton’s P Class

A line up of three of the Hatton’s P Class tank livery samples

Although only announced last month progress on the twelve livery versions of their ex SECR / SR Wainwright P class 0-6-0 tanks is progressing at pace. They have now received in the last week the first livery samples and three of these can be seen left, with all able to seen on the Hatton’s website project update page here.

Shades of a 1960s LCGB railtour the P Class tank along with a Hornby Adams radial tank. The Kernow Gate Stock can also be seen in the background.

These are of course the first livery samples and a few tweaks are still to be made but the excellent attention to detail on these models can be clearly seen.

Shades of a 1960s LCGB railtour the P Class tank along with a Hornby Adams radial tank. The Kernow Model Rail Centre Gate Stock and O2 can also be seen in the backgroundThe full details of the available versions and pre-order details can be found here.
Although being livery samples these were unpowered we could not resist running one the samples as a double header to possibly represent a Locomotive Club of Great Britain railtour in the 1960’s.

Kernow Model Rail Centre, Gate Stock and Bulleid Diesels

Set 363 sits in the bay platform at Twelve Trees Junction

The ex London and South Western Railway pull push Gate Stock has featured on this blog often and now that they have been produced and awaiting shipment from China a small number have been air freighted to the UK for magazine review samples etc. The BR Lined Crimson set 363 (K1003) can be seen left. Three other livery versions are being produced, namely: K1001 Set 374 SR Lined Olive, K1002 Set 373 SR Malachite, and K1004 Set 373 BR Green (plated) See here for more details.

 

10201 hauls a rake of Pullman coaches with ease

Although announced some time ago, the necessary research for the production of the CADS for these diesels with their complex multiple curved exterior shape has as already documented taken much longer than planned. When last year additional information came to light the development process moved on at a fast pace and now production of the first versions has now been completed. The model ran exceptionally well on Twelve Trees Junction hauling a long rake of twelve wheel Pullman coaches with considerable ease, due to its good weight and a centrally mounted 5 pole motor with flywheels powering each bogie.

These models will each feature in a more detailed review post in due course so watch this space…

Both an example of the the Gate Stock, the Bulleid diesel 10201 and as an exclusive, their first running Engineering Prototype of the Western Region D600 series Hydraulics, also being produced by the Kernow Model Rail Centre will be running on the High Wycombe and District’s Hinton Parva layout this weekend at the Warners / BRM Magazine National Festival of Railway Modelling. if you are planning to attend come and say hello to the Hinton Parva team.

Read Full Post »

Merseyside based model retailer and commissioner Hatton’s have announced today two new exclusive locomotives to their range. The one of most interest for followers of this blog will no doubt be the diminutive ex South Eastern and Chatham Railway, Wainwright P class 0-6-0T.

The 1st running Engineering Prototype (EP) of the Hatton’s ex SECR P class. Picture courtesy and copyright A York

The P class locomotives were small both in size and numerically as only eight were built, there were a also number of differences between the members of the class during their lifetime.
The first two members of the class introduced in February 1909 numbers 753/556/1556/31556 and 754/557/1557/31557 had 4 and half inch taller cabs and side tanks than the remaining six members that were built in February and July 1910. Although only a small difference in height it is defiantly noticeable on the front face of the locomotive.

Another view of the SECR P Class EP. Picture courtesy and copyright A York

There were two distinct smokebox styles with differing rivet arrangements and also the buffers varied from the original tapered SECR style to the later SR stepped type, with some being fitted with Stroudley Round base type briefly at some stage as well. The Furness lubricators originally mounted on either side of the smokeboxes were removed during the 1920s. The last member of the class was withdrawn from British Railways service in March 1961, some also saw industrial use, and four have been preserved, including 1556 from the first batch and three from the second batch.

Illustration of the differing tooling options for cab / tanks heights and smokeboxes

Hatton’s have tooled for both cab / tank height styles, the two different smokeboxes with different rivet patterns, two main types of buffers, alternative rear steam heating pipes, smokebox lubricators and number plates where applicable. Hatton’s have worked from the original works drawings for the locomotives and have also been working closely with the relevant preserved railways on which the remaining examples remain.

Left hand side view. Picture courtesy and copyright A York

Specifications include: 5 Pole motor within the boiler and gearbox within the firebox, weights within the boiler for adhesion, RP25 wheel profiles, 6 pin DCC socket, NEM coupling pockets, separately fitted and blackened handrails, detailed cab interior, all wheel pick up, fluted connecting rods with oily cosmetic finish, separately applied drain cocks, oil lubricators, brass whistle, smokebox number plate (i.e. not moulded) on BR versions.

Right hand side view. Picture courtesy and copyright A York

Also included for owner to fit will be etched engine headsignal discs, locomotive lamps and even an oil can, as the latter were often seen on top of the tanks!

More details and how to order can be found on the dedicated page on the Hatton’s website here. Delivery is expected starting as early as December this year with the balance in January 2018. They will retail at £99 each.

The planed, and at this moment in time only, twelve releases are as follows:

Livery graphic for HA-P-001

H4-P-01 No. 178 in SECR lined green, 1910-11 (as preserved) short cab, SR Buffers, smokebox with 1 row of rivets and lubricator

H4-P-02 No. 753 in SECR lined green, 1909-11 (as preserved) tall cab, SR Buffers, rear window bars, smokebox with 2 rows of rivets and lubricator

H4-P-03 No. 754 in SECR wartime grey, 1910-1920s, tall cab, Bottle buffers, higher steam pipes and smokebox with 2 rows of rivets

Livery graphic for HA-P-4-004

H4-P-04 No. A325 in Southern Railway lined olive green, 1924 to mid 1930s, short cab, bottle buffers, rear window bars, higher steam pipe and smokebox with 2 rows of rivets

H4-P-05 No. 1555 in Southern Railway black, 1938-48, short cab, bottle buffers, rear window bars, higher steam pipe and smokebox with 2 rows of rivets

H4-P-06 No. 1558 in Southern Railway black with Sunshine lettering, 1941-48, short cab, bottle buffers, rear window bars, higher steam pipe and smokebox with 2 rows of rivets

Livery graphic for HA-P-4-006

H4-P-07 No. 31027 in BR black with early emblem, 1949 to withdrawal in 1961, short cab, SR buffers, rear window bars, higher steam pipe and smokebox with 2 rows of rivets

H4-P-08 No. 31323 in BR black with late crest, 1959-61, short cab, SR buffers, rear window bars and smokebox with 1 row of rivets

H4-P-09 “Pioneer II” in Bowaters Paper Mill lined green, 1958-61 (ex 178/1178/31178) short cab, SR buffers, no vacuum pipe and smokebox with 2 rows of rivets

Livery graphic for HA-P-4-007

H4-P-10 “Pride of Sussex” in Robertsbridge flour mill green, 1961-71, (ex 53/556/1556/31556), tall cab, SR buffers, no steam pipe and smokebox with 2 rows of rivets

H4-P-11 No. 27 “Primrose” in Bluebell Railway lined black, 1961-63, short cab, SR buffers, rear window bars and smokebox with 2 rows of rivets

H4-P-12 No. 323 in Bluebell lined blue (as preserved) short cab, SR buffers, lubricator and smokebox with 1 row of rivets

A higher angle 3/4 view shows off the wealth of detail. Picture courtesy and copyright A York

One obvious omission from the list of proposed releases is a post 1931 Southern Railway lined green without the ‘A’ prefix and in the 1xxx numbering. Another option would have been No.31556 in BR black with British Railways in sunshine lettering.

Hatton’s as per the images on this post have received the first fully running Engineering Prototype and having had the opportunity / privilege to inspect it first hand and see it running, happily hauling four Mk1 coaches, their weight and performance match the good looks they have captured in the tooling. Hatton’s should also be congratulated on the amount of detail and toolong options they have allowed for especially the two taller cab / tank versions. Some of the engines did carry tool boxes in various positions on the tank tanks tops but Hatton’s have purposely not included for these, or the Stroudley type buffer, for reasons of the additional tooling costs, so it will remain a possible modeller / aftermarket opportunity depending on the chosen prototype.

The Hatton’s EP of the Andrew Barclay saddle tank

Hatton’s have today also announced that they are going to produce, also in 00 the Andrew Barclay industrial saddle tank with eight versions / liveries of the 14″ cyclinder and four livery / versions of the 16″ cyclinder size versions. They will have similar specifications to the SECR P Class tanks above, with multiple tooling variations. Like with the ex SECR P class Hatton’s have a running first EP. They will also retail at £99 each, and the planned availability is late January 2018. Full details can be found on the dedicated page on the Hatton’s website here. 

Read Full Post »

%d bloggers like this: