Feeds:
Posts
Comments

Posts Tagged ‘Saddle tank’

Hatton’s only announced their production of the ex SECR Wainwright P Class tanks after first Engineering Prototypes had been received back in September last year as I reported in my “Can I have a P please” post, here. Although it was hoped to be able to deliver these before the end of last year Hattons should be congratulated in getting 10 of the 12 initially announced versions to the market last week, a refreshingly short process time especially as this is the first locomotive project that Hatton’s have handled direct with the manufacturing company in China. The two SECR lined livery versions will be following shortly.

A side on view of No. 1558

Although only eight P class locomotives were built, there were a number of differences between the members of the class and during their lifetime and Hatton’s have certainly risen exceptionally well to the challenge.

The separately applied items are clear here on No. 1558

The first two members of the class introduced in February 1909 numbers 753/556/1556/31556 and 754/557/1557/31557 had 4 and half inch taller cabs and side tanks than the remaining six members that were built in February and July 1910. Although only a small difference in height it is noticeable when the locos are side by side.

A rear 3/4 view of No. 1555 (which will become 31555 in 1948 livery)

Hatton’s have tooled for both cab / tank height styles, the two different smokeboxes with different rivet patterns, two main types of buffers, alternative rear steam heating pipes, smokebox lubricators, number plates (where applicable) and with or without glazing bars on the rear cab spectacles.

The first 12 version announced by Hatton’s are as follows:

  • H4-P-01 No. 178 in SECR lined green, 1910-11 (as preserved) short cab, SR Buffers, smokebox with 1 row of rivets and lubricator
  • H4-P-02 No. 753 in SECR lined green, 1909-11 (as preserved) tall cab, SR Buffers, rear window bars, smokebox with 2 rows of rivets and lubricator
  • H4-P-03 No. 754 in SECR wartime grey, 1910-1920s, tall cab, Bottle buffers, higher steam pipes and smokebox with 2 rows of rivets
  • H4-P-04 No. A325 in Southern Railway lined olive green, 1924 to mid 1930s, short cab, bottle buffers, rear window bars, higher steam pipe and smokebox with 2 rows of rivets
  • H4-P-05 No. 1555 in Southern Railway black, 1938-48, short cab, bottle buffers, rear window bars, higher steam pipe and smokebox with 2 rows of rivets
  • H4-P-06 No. 1558 in Southern Railway black with Sunshine lettering, 1941-48, short cab, bottle buffers, rear window bars, higher steam pipe and smokebox with 2 rows of rivets
  • H4-P-07 No. 31027 in BR black with early emblem, 1949 to withdrawal in 1961, short cab, SR buffers, rear window bars, higher steam pipe and smokebox with 2 rows of rivets
  • H4-P-08 No. 31323 in BR black with late crest, 1959-61, short cab, SR buffers, rear window bars and smokebox with 1 row of rivets
  • H4-P-09 “Pioneer II” in Bowaters Paper Mill lined green, 1958-61 (ex 178/1178/31178) short cab, SR buffers, no vacuum pipe and smokebox with 2 rows of rivets
  • H4-P-10 “Pride of Sussex” in Robertsbridge flour mill green, 1961-71, (ex 53/556/1556/31556), tall cab, SR buffers, no steam pipe and smokebox with 2 rows of rivets
  • H4-P-11 No. 27 “Primrose” in Bluebell Railway lined black, 1961-63, short cab, SR buffers, rear window bars and smokebox with 2 rows of rivets
  • H4-P-12 No. 323 in Bluebell lined blue (as preserved) short cab, SR buffers, lubricator and smokebox with 1 row of rivets

A 3./4 rear view of No. 754 in SECR war time grey note no glazing bars on the rear cab spectacles. (which will become No. 1557 in SR post war black livery)

The model is supplied in a Hatton’s branded sturdy foam lined box and further protected by the now common up and over plastic tray in a plastic sleeve. It should be noted that this outer sleeve is a very tight fit so care should be taken trying to access the model. I also positively note that packing allows for the tension lock couplings to remain in place.

Four and half inches does not equate to much in 4mm scale but as can be seen it is just noticeable with the high cab to the right on 754

Hopefully the pictures of three of the models with in this post will speak for themselves. I am certainly very impressed with the build quality (although on  the rear sprung buffers was loose on one of my examples), finesse and level of separately applied details such as: fine blackened handrails, detailed cab interior,  drain cocks, oil lubricators, brass whistle, lamp irons front and rear, smokebox number plate (i.e. not moulded) on BR versions.

A 3/4 front view of No. 1558

An accessory bag of further detaining parts is provided that contains: buffer beam coupling hooks with cosmetic screw link couplings, steam heating pipes of a type relevant to the livery of the loco, 3 off SR Engine Head Signal discs (referred to incorrectly as “Route Indicator Disks” within the supplied instruction sheet) an SR style lamp and what  must be a first for an R-T-R model 3 off tiny oil cans!

The Sunshine style lettering also incorrectly includes the inner black line within the numerals (click to enlarge)

The livery application is very crisp and a nice stain finish, very much as we have come to expect from current R-T-R models. Manufacturers build plates and the SECR ownership plates (where applicable) are printed rather than separate etched items. I have however spotted that the SR post war black version the ‘Sunshine’ numerals are incorrect in that they should not have the inside black line as this was only applied to the ‘Southern’ lettering.

A view into the cab showing the printed dials

Within the cabs the various gauges are part of the spectacle glazing insert they have dials / needles nicely printed on them although the moulding also has the copper pipe runs to these gauges but have been left unprinted / painted.

With its 5 Pole motor within the boiler and gearbox within the firebox (allowing the daylight gap under the boiler), boiler weights and all wheel pick up the performance is smooth and reliable at all speeds. A 6 pin DCC socket is included, accessed by the removal of the body, simply achieved via the four screws located on the underside either side of the NEM coupling pockets. Not surprisingly in a model of such small prototype sound fitting will be a slight challenge requiring some modelling skills but helpfully Hatton’s have suggested a process for achieving this within the supplied instruction sheet.

Canute Road Quay could occasionally be relocated further South East ..

My No. 1558 will be simply weathered, whilst No. 1556 will be changed to one of the current missing livery options as her later early 1948 identity of No.31556 with ‘British Railways’ in SR Sunshine lettering style, whilst tall cab No. 754 will become her later 1557 identity in SR post war black as per No. 1558.  As there are still possibly two or three some other livery versions possible some of these might yet appear so watch this space.

In conclusion  as I am sure you can tell Hatton’s have produced and excellent model and with the number of versions announced should be very popular for modellers of the South East from all periods including the preservation era.

Read Full Post »

Merseyside based model retailer and commissioner Hatton’s have announced today two new exclusive locomotives to their range. The one of most interest for followers of this blog will no doubt be the diminutive ex South Eastern and Chatham Railway, Wainwright P class 0-6-0T.

The 1st running Engineering Prototype (EP) of the Hatton’s ex SECR P class. Picture courtesy and copyright A York

The P class locomotives were small both in size and numerically as only eight were built, there were a also number of differences between the members of the class during their lifetime.
The first two members of the class introduced in February 1909 numbers 753/556/1556/31556 and 754/557/1557/31557 had 4 and half inch taller cabs and side tanks than the remaining six members that were built in February and July 1910. Although only a small difference in height it is defiantly noticeable on the front face of the locomotive.

Another view of the SECR P Class EP. Picture courtesy and copyright A York

There were two distinct smokebox styles with differing rivet arrangements and also the buffers varied from the original tapered SECR style to the later SR stepped type, with some being fitted with Stroudley Round base type briefly at some stage as well. The Furness lubricators originally mounted on either side of the smokeboxes were removed during the 1920s. The last member of the class was withdrawn from British Railways service in March 1961, some also saw industrial use, and four have been preserved, including 1556 from the first batch and three from the second batch.

Illustration of the differing tooling options for cab / tanks heights and smokeboxes

Hatton’s have tooled for both cab / tank height styles, the two different smokeboxes with different rivet patterns, two main types of buffers, alternative rear steam heating pipes, smokebox lubricators and number plates where applicable. Hatton’s have worked from the original works drawings for the locomotives and have also been working closely with the relevant preserved railways on which the remaining examples remain.

Left hand side view. Picture courtesy and copyright A York

Specifications include: 5 Pole motor within the boiler and gearbox within the firebox, weights within the boiler for adhesion, RP25 wheel profiles, 6 pin DCC socket, NEM coupling pockets, separately fitted and blackened handrails, detailed cab interior, all wheel pick up, fluted connecting rods with oily cosmetic finish, separately applied drain cocks, oil lubricators, brass whistle, smokebox number plate (i.e. not moulded) on BR versions.

Right hand side view. Picture courtesy and copyright A York

Also included for owner to fit will be etched engine headsignal discs, locomotive lamps and even an oil can, as the latter were often seen on top of the tanks!

More details and how to order can be found on the dedicated page on the Hatton’s website here. Delivery is expected starting as early as December this year with the balance in January 2018. They will retail at £99 each.

The planed, and at this moment in time only, twelve releases are as follows:

Livery graphic for HA-P-001

H4-P-01 No. 178 in SECR lined green, 1910-11 (as preserved) short cab, SR Buffers, smokebox with 1 row of rivets and lubricator

H4-P-02 No. 753 in SECR lined green, 1909-11 (as preserved) tall cab, SR Buffers, rear window bars, smokebox with 2 rows of rivets and lubricator

H4-P-03 No. 754 in SECR wartime grey, 1910-1920s, tall cab, Bottle buffers, higher steam pipes and smokebox with 2 rows of rivets

Livery graphic for HA-P-4-004

H4-P-04 No. A325 in Southern Railway lined olive green, 1924 to mid 1930s, short cab, bottle buffers, rear window bars, higher steam pipe and smokebox with 2 rows of rivets

H4-P-05 No. 1555 in Southern Railway black, 1938-48, short cab, bottle buffers, rear window bars, higher steam pipe and smokebox with 2 rows of rivets

H4-P-06 No. 1558 in Southern Railway black with Sunshine lettering, 1941-48, short cab, bottle buffers, rear window bars, higher steam pipe and smokebox with 2 rows of rivets

Livery graphic for HA-P-4-006

H4-P-07 No. 31027 in BR black with early emblem, 1949 to withdrawal in 1961, short cab, SR buffers, rear window bars, higher steam pipe and smokebox with 2 rows of rivets

H4-P-08 No. 31323 in BR black with late crest, 1959-61, short cab, SR buffers, rear window bars and smokebox with 1 row of rivets

H4-P-09 “Pioneer II” in Bowaters Paper Mill lined green, 1958-61 (ex 178/1178/31178) short cab, SR buffers, no vacuum pipe and smokebox with 2 rows of rivets

Livery graphic for HA-P-4-007

H4-P-10 “Pride of Sussex” in Robertsbridge flour mill green, 1961-71, (ex 53/556/1556/31556), tall cab, SR buffers, no steam pipe and smokebox with 2 rows of rivets

H4-P-11 No. 27 “Primrose” in Bluebell Railway lined black, 1961-63, short cab, SR buffers, rear window bars and smokebox with 2 rows of rivets

H4-P-12 No. 323 in Bluebell lined blue (as preserved) short cab, SR buffers, lubricator and smokebox with 1 row of rivets

A higher angle 3/4 view shows off the wealth of detail. Picture courtesy and copyright A York

One obvious omission from the list of proposed releases is a post 1931 Southern Railway lined green without the ‘A’ prefix and in the 1xxx numbering. Another option would have been No.31556 in BR black with British Railways in sunshine lettering.

Hatton’s as per the images on this post have received the first fully running Engineering Prototype and having had the opportunity / privilege to inspect it first hand and see it running, happily hauling four Mk1 coaches, their weight and performance match the good looks they have captured in the tooling. Hatton’s should also be congratulated on the amount of detail and toolong options they have allowed for especially the two taller cab / tank versions. Some of the engines did carry tool boxes in various positions on the tank tanks tops but Hatton’s have purposely not included for these, or the Stroudley type buffer, for reasons of the additional tooling costs, so it will remain a possible modeller / aftermarket opportunity depending on the chosen prototype.

The Hatton’s EP of the Andrew Barclay saddle tank

Hatton’s have today also announced that they are going to produce, also in 00 the Andrew Barclay industrial saddle tank with eight versions / liveries of the 14″ cyclinder and four livery / versions of the 16″ cyclinder size versions. They will have similar specifications to the SECR P Class tanks above, with multiple tooling variations. Like with the ex SECR P class Hatton’s have a running first EP. They will also retail at £99 each, and the planned availability is late January 2018. Full details can be found on the dedicated page on the Hatton’s website here. 

Read Full Post »

%d bloggers like this: