Feeds:
Posts
Comments

Posts Tagged ‘London Brighton and South Coast Railway’

Model Rail Magazine in cooperation once again with Canadian manufacture Rapido Trains, (their previous collaboration the ex GER J70 is close to delivery) is to be producing the LBSCR Class E1 0-6-0T. Officially being announced with the publication date of the July issue No. 249 of their magazine on June 7th, however with  subscriber copies now having been delivered the information is in the public domain.

E1 Class as currently on the Isle of Wight steam railway, masquerading as W2. Originally B110 and sold to industrial use in 1927

With the exception of the final six built in 1891 under the auspices of RJ Billington with different boiler, dome and chimney known as E1s from new, the rest of the 80 strong class were originally introduced by William Stroudley from 1874 as the E Class. Essentially a larger goods version of the A1 Terrier 0-6-0t, using the same cylinders, motion and boilers as the D Class 0-4-2 passenger tanks. Later all the E Class were reclassified as E1s.

E class 686 in LB&SCR livery. Picture courtesy and copyright Mike Morant collection

Although most of the class worked on the Brighton section some were used In Southampton Docks, so ideal for Canute Road Quay, and on the Isle of Wight. Ten members of the class were converted between 1927 and 1929 to become E1/R Class 0-6-2t with new cabs, extended bunkers and the addition of a Radial axel for use in the West Country.

E1 class 2506 in post war’Sunshine’ black livery. Picture courtesy and copyright Mike Morant collection

Although withdrawals started as early as 1913 many passed into British Railways ownership with the last surviving to 1960. Four members of the class ended up being sold into industrial colliery use, including the one preserved example B110 now located on the Isle of Wight steam railway.

The initial Model Rail Magazine versions to be available, during 2020, are as follows:

  • MR-401  97 – LBSCR Stroudley Improved Engine Green
  • MR-402  127 – LBSCR Stroudley Goods Green
  • MR-403  B96 – Marsh umber but with ‘B’ prefix as applied by SR
  • MR-404  2142 – SR black (pre-War)
  • MR-405  2606 – SR black, ‘sunshine’ lettering
  • MR-406  32151 – BR lined black, no emblem
  • MR-407  32113 – BR plain black, early emblem
  • MR-408  32689 – BR plain black, early emblem (weathered)
  • MR-409  W2 – SR (IoW) lined green
  • MR-410  W4 – BR (IoW) black, early emblem

They will be available soon to be pre-ordered via the Model Rail Offers website managed by the Kernow Model Rail Centre.

Full details of the specification to follow.

Also announced by Model Rail Magazine, also via Rapido Trains is the BR(w) 0-6-0 16xx Class pannier tanks.

Read Full Post »

It has been a busy period recent both in the arrival of some new ready to run models such as the Hatton’s ex SECR P class 0-6-0t,  see my review here, and also their 14″ Andrew Barclay along with some time spent applying some finishing decals prior to weathering of a couple of kit built models namely the ex LBSC D1  0-4-2t and ex SECR S Class 0-6-0st. All these models still require a little work, including in some cases repainting and numbering and also weathering. Some of you may have seen some of these pictures before on my twitter feed. 

SECR P Class 754 in WW1 grey livery

With the arrival of the Hatton’s P class I took the opportunity to temporarily move the location of Canute Road Quay further South east and backdate to earlier than my usual 1946-49 modelling period, including some of my earlier style wagons that do not usually get an outing. It is one of the advantages of having such a layout that has no real identifiable items to identify the actual time period.

ex SECR P Class 1555

Eventually to suit my preferred time period: No. 754 will be repainted and numbered to become  her later identity of No. 1557 in SR post war black livery, being one of the first two built with the slightly higher cab; whilst No. 1555 will be renumbered and lettered as No. 31555 with full ‘British Railways’ Sunshine lettering to represent her condition in early 1948.

ex LBSC D1 Class No. 2357

The ex LBSC D1 0-4-2t is built from a South Eastern Fincast white metal kit. In fact a couple of examples of the class, including No. 2286 are know to have been used at Southampton docks for a while in mid 1930s up to WW2 so I am not actually stretching history too far by running my model of no. 2357 on Canute Road Quay albeit in a slightly later post war-time period, although she was technically allocated to Ashford at the time so she is obviously on loan.

Andrew Barclay 14″ before being modified with wooden dumb buffers and weathered

The Hatton’s Andrew Barclay 14″ 0-6-0t will be modified to replace the existing buffers with wooden dumb buffers, have the WTT branding stripped off and suitably weathered to represent the condition of such locomotives that were used on some of the other lines and private wharfs that existed in and around Southampton  area especially along the River Itchen.
I also have a Hornby Peckett on order, that I will likewise modify with wooden dumb buffers to give some further variety to locomotives at Canute Road Quay and differ from the standard RTR versions. I will post details of this conversion in due course.

ex SECR S Class No. 1685

The ex SECR S Class 0-6-0 saddle tank No. 1685 is also built from South Eastern Fincast white metal kit. The S Class was in fact only one locomotive due to a requirement for a heavy shunter at Richborough Port during WW1 and so was converted from a C Class 0-6-0 tender locomotive, after the war she was transferred to Bricklayers Arms until withdrawal in 1951. Like the ex LBSC D1 she must be on load to Canute Road Quay.

ex LSWR B4 Class No. 100

With Canute Road Quay’s appearance looming at the excellent Railex exhibition organised by friends at the Princes Risborough and District MRC, being held at Stoke Mandeville Stadium, Stadium Approach, Aylesbury, Bucks, HP21 9PP on the 26th and 27th May 

USA Tank No. 70

I have started to return Canute Road Quay to its intended Southampton-ish location and the ex LSWR B4 0-4-0 and USA 0-6-0 tanks have returned along with suitable rolling stock and uncouplers etc all wheel cleaned, tried and tested in readiness for what I know will be an enjoyable weekend playing trains, shunting and talking.

USA Tank No.68

If you are planning to visit Railex please make sure you come and say hello. I am stand 61, towards the right hand back corner (as you come into the hall) and will ably assisted by friend and fellow modeller Simon Paley for the weekend, he being the much younger looking operator!

I hope this post has been of interest and as stated above it does show the advantages of having a layout that is not an actual real location but endeavours to capture a flavour and also is not easily identifiable to a specific time period. I also intend to occasionally run in a later 1960s period with a few diesel shunters so more on this in a future post.

Read Full Post »

Rails Limited in partnership with Dapol and the National Railway Museum announced at this weekends London Festival of Railway Modelling that they will produce the LBSC Terrier and all its subsequent variants in OO Gauge.

With all the experience Dapol has gained from making the award winning O Gauge version of the A1 / A1X Terrier it is fully anticipated that this project will progress very quickly. Decorated samples are expected to be available Autumn 2018.

Initially six livery versions will be available in DCC ready, DCC and DCC Sound fitted:

  • A1X No. 32655 in BR lined black with early crest
  • A1 No. 82 Boxhill in LBSC Stroudley improved engine green.
  • A1 Bodiam in KESR Blue
  • A1X No. 751 in SECR lined green
  • A1X No. 2644 in Southern post 1931 lines Olive Green
  • A1X No. 32661 in BR lined black with late crest

The tooling will allow eventually for most variations of the A1, A1X and IOW variants of the locomotive to be produced, including two cab/bunker types, two smokebox/boilers. Wooden and metal brake rigging where appropriate.

The announced specification includes:

  • Diecast chassis and running plate
  • Detailed plastic moulded body
  • Many separately fitted parts
  • Diecast wheels with sprung centre driving wheels to give compensation providing all wheel electrical pick up and better traction
  • DCC and sound Ready with easy access through a removable body which exposes a NEXT-18 socket
  • DCC and DCC Sound Fitted variants using Dapol’s own sound recording of 32678 on the Kent and East Sussex Railway
  • Powerful 5 pole skew wound motor
  • Factory sound fitted locomotives will feature RealDrive braking control

Pricing has been announced as being £110.00 each (DCC Ready), DCC Fitted Versions £140 / DCC Sound Versions £239 with pre ordering being recommended and secured with a £30 deposit.

These models will superceed the now much long in the tooth and slightly hybrid Dapol / Hornby Model. Full details can be found on the Rails website here

Read Full Post »

If you so wish, wear your poppy with pride today, pause respectfully for two minutes at 11 am this Armistice Day morning and again tomorrow on Remembrance Sunday, remembering all those, both service personnel  and civilian whom have given their lives for the freedom that we all enjoy today, and should you feel so inclined, support the sterling work of the Royal British Legion.

They shall grow not old, as we that are left grow old:
Age shall not weary them, nor the years condemn.
At the going down of the sun and in the morning,
We will remember them.

Locomotive 333 was built originally by the London Brighton and South Coast Railway, designed by Billinton, as an L class 4-6-4 ‘Baltic’ tank. She was given the name Remembrance and became the companies War Memorial engine and carried a plaque with the inscription:

“In grateful remembrance of the 532 men of the L.B.& S.C.Rly. who gave their lives for their country, 1914-1919″

In 1934, under the auspices of Maunsell they were rebuilt as Class N15x (an appropriate Brighton-style suffix) 4-6-0s, and fitted with standard Urie LSWR tenders along with smoke deflectors. Now number 2333 ‘Remembrance’ retained its name, plaque and status within the Southern Railway.

2333 on Fisherton Sarum this weekend at the Tolworth Showtrain exhibition As I am this weekend exhibiting Fisherton Sarum at the Hampton Court MRS, Tolworth Showtrain at the Tolworth Recreation Centre, Fullers Way North, Tolworth, Surrey, KT6 7LQ my model (albeit currently a static one) of 2333 ‘Remembrance’ is taking pride of place on the very front road of the shed by way of a mark of respect.

Railway companies across the country and indeed the world lost many staff; not only those drafted into the military services, but also those lost whom continued their duties on the railways keeping the networks up and running, we should honour and remember them all.

Inscribed on James Scott’s Victory Arch, at Waterloo station: “Dedicated to the employees of the Company who fell in the war.”

And just to end this post – the poppy is more than a one time of a year symbol:

I am not a badge of honour, I am not a racist smear,
I am not a fashion statement, to be worn but once a year,
I am not glorification of conflict or of war.
I am not a paper ornament a token,
I am more.

I am a loving memory, Of a father or a son,
a permanent reminder of each and every one. 
I’m paper or enamel, I’m old or shining new,
I’m a way of saying thank you, To every one of you.

I am a simple poppy, a reminder to you all,
That courage faith and honour,
will stand where heroes of all kinds fall.

Read Full Post »

The Bachmann Europe team met up this week with the model trade press to update the market on the latest developments and progress, a full report can be found on the RmWeb forum here and I take this opportunity to update on those items of a Southern / Southern Region interest. As in previous years at this Media day no new product  announcements were made. All images on this post are copyright and courtesy of Andy York / BRM and or Bachmann Europe.

Firstly, in 00 gauge the relevant SR updates from Bachmann are as follows:

The impressive SECR livery sample of the 60′ birdcage stock

Since the London festival of model railways where I reported on the ex South Eastern and Chatham Railway (SECR) 60′ Birdcage stock BR Crimson livery sample being shown, the livery samples for the SECR

The SECR 60′ composite livery sample

and SR Olive Green versions have now been received and signed off. I have to say the decoration and lining look extremely fine and

The other SECR brake 3rd livery sample

well done. The SECR dark lake version in particular is very impressive and must be a first  such accurate and highly detailed ready to run rolling stock for the pre-grouping era . Delivery is expected in September.

SR livery sample of the ex SECR 60′ Birdcage stock

The first releases will comprise of the following:
39-600 SECR 60’ Birdcage Brake Composite SECR Dark Lake

SR Composite livery sample

39-601 SECR 60’ Birdcage Brake Composite SR Olive Green
39-602 SECR 60’ Birdcage Brake Composite BR Vermillion
39-610 SECR 60’ Birdcage Composite SECR Dark Lake
39-611 SECR 60’ Birdcage Composite SR Olive Green

ex SECR Brake 3rd in SR livery

39-612 SECR 60’ Birdcage Composite BR Vermillion
39-620 SECR 60’ Birdcage Brake 3rd SECR Dark Lake
39-621 SECR 60’ Birdcage Brake 3rd SR Olive Green
39-622 SECR 60’ Birdcage Brake 3rd BR Vermillion

Bachmann H2 Class CADs

The ex London Brighton and South Coast H2 class Marsh Atlantic 4-4-2 announced in September 2013  is being delayed by another 3 months as an issue with the curvature of the rear splashers was identified and a decision made to address that so it is likely to be around February/March 2018 when they are finally released. The CAD drawings can be seen left.
Two versions are due for initial release:
31-921 – 32424 “Beachy Head” BR Black Early Emblem
31-920 – 2426 ‘St. Albans Head” SR Olive Green

Bachmann Ransomes and Rapier 45T steam crane CADS

Bachmann first announced the 45T Ransomes and Rapier steam crane in March 2015. They were introduced by a number of railway companies, including the Southern Railway, during the war and some lasted into the 1980s.

A further CAD view of the 45T steam crane

The impressive CAD artwork is shown left, not all the gear wheels will work but some items such as the outriggers will be positionable.
Initially they are producing four versions:
38-800 SR livery,
38-801 GWR Livery
38-802 BR black livery
38-803 BR red livery

Lastly from a Graham Farish  perspective there is an update on the N gauge version of the ex SECR 60ft Birdcage stock and also the ex SECR C class 0-6-0.

Graham Farish C Class 0-6-0 CADS

Firstly the ex SECR C Class 0-6-0 that was announced in January this year is now at the CAD stage as per the image left. The model will feature a NEXT 18 DCC decoder socket, coreless motor, loco drive, fine cab detail and NEM couplers, the initial release will comprise of:
372-775 C Class 0-6-0 No. 271 in SECR plain green livery
372-776 C Class 0-6-0 No. 1256 Southern Railway Black livery
372-777 C Class 0-6-0 No. 31227 in BR Black livery with early emblem

Graham Farish EP of the N Gauge 60′ Birdcage stock

The first EP samples of the 60′ Birdcage stock were on show, they were first announced in July 2014,  and these are likely to be available in the second quarter of 2018. The initial releases will be sold as three coach sets, as follows:
374-910  60′ Birdcage Stock – 3-Pack – SECR Wellington Brown
374-911  60′ Birdcage Stock – 3-Pack – SR Olive Green
374-912 60′ Birdcage Stock – 3-Pack – BR Vermillion

Good to see further progress being made on the above items. As any additional information comes to light I will post accordingly.

Read Full Post »

Well the annual event that is the Warley National Model Railway show at the NEC has now been and gone and by all accounts it appears that it was a good show, not that I was able to see as much of it as I might have liked. I had a good weekend on the Hornby Magazine stand operating friend and Editor Mike Wild’s latest layout Grosvenor Square, despite it being Western Region and DCC, but I think I just about coped. I apologise to anyone whom overheard and didn’t like my complaints (usually timed to gained maximum effect depending on whom was in earshot…especially that nice Mr Pete Waterman on the stand opposite…) that all Western region locomotives look the same, it was in jest… honest!

As is becoming more usual now a number of suppliers and manufacturers time announcements, product development updates and availability of new product around the time of / during the show and this year was no exception. This post attempts to round up some of those items of interest seen at the show from a Southern perspective, although this was slightly more limited than it has been in the past.

Hornby

Like last year, Hornby used the Warley show to give a presentation on some of their plans for 2017 and make some new product announcements, including a  Hitachi IEP Bi-Mode Class 800/0, which can be found via their website on their Engine Shed Blog. The full 2017 range including all the liveries variations from existing rather than new tooling is planned to be launched in January 2017.

Hornby H Class EP

Hornby H Class EP

Further to the ex SECR H lass 0-4-4T announced in September  they have also now clarified the planned initial releases as being as follows, which differs slightly from the initial information I was given at the time:

R3538 number 308 SECR lined green.  No.308 was built at Ashford Works in June 1906, entering traffic at Slades Green and was repainted to Maunsell Dark Green in 1925, when also renumbered as A308. Moving to Gillingham in July 1931, her last shed was Tunbridge Wells West, from where she was withdrawn in December 1962.

Hornb y H Class EP rear 3/4 view

Hornb y H Class EP rear 3/4 view

R3539 number 31518 BR late crest (with Overhead Electric warning flashes) lined black and pull push fitted. No. 31518 was built in July 1909 at Ashford and entered traffic at Orpington, numbered 518, Being dual braked, 518 mainly worked Chatham section trains. In December 1923 she became A518, then 1518 in July 1931. Post Nationalisation she was renumbered 31518 and later  pull push fitted in March 1952, Withdrawal took place from Three Bridges shed in January 1964.

A further view of the Hornby H Class EP

A further view of the Hornby H Class EP

R3549 number 1324 SR Maunsell Olive Green. No.1324 was built at Ashford Works in May 1907, entering traffic as No.324 at Ashford. In 1924, based Tonbridge, she often operated services between the Eastern and Central sections of the Southern Railway. Renumbered as No.31324 under British Railways, withdrawal from Three Bridges shed occurred in July 1962.

It therefore appears that the previously advised release of the BR early emblem version will not materialise as part of the first releases.

Hornby livery samples of 21C1 and 21C3 together

Hornby livery samples of 21C1 and 21C3 together

The running samples of the new original style Bulleid Merchant Navy pacifics were on display,  the malachite green versions of 21c1 and 21C3 can be seen left, and they represent the condition that these locomotives first ran between introduction in 1941 and early 1943.

Hornby 21C1

Hornby livery sample of 21C1 note the cover for the chimney

There is one correction to be made to the livery to 21C3 which will be reflected on the production models in that the side numbers and Southern lettering on the tender will be correctly shaded in black not green. The four releases of these models are due first quarter next year (delayed from 2016) and are as follows:

Hornby livery sample of 21C3

Hornby livery sample of 21C3

R3434 – SR 4-6-2 ‘Channel Packet’ ’21C1′ Merchant Navy Class (Original Air Smoothed) in as introduced 1941 condition with widows peak

R3435 – SR 4-6-2 ‘Royal Mail’ ’21C3′ Merchant Navy Class (Original Air Smoothed) in as introduced 1941 condition with widows peak

A further view of Hornby livery sample of 21C3

A further view of Hornby livery sample of 21C3

R3436 – BR 4-6-2 ‘Clan Line’ ‘35028’ Merchant Navy Class (Original Air Smoothed) – BR Brunswick Green. early crest ,

R3382TTS- BR 4-6-2 ‘Holland-Afrika Line’ ‘35023’ Merchant Navy (Original Air Smoothed) – BR Brunswick Green, early crest with TTS Sound

Look out for a post likely to be published next week detailing the exact condition and dates applicable to all these four versions which I hope will assist those wishing to purchase the correct version for their time period or those potentially wanting to renumber to other members of the class.

Hornby also announced a brand new ‘King Arthur’ tooling!  Although this is in the form a Class 87 AC electric number 87010 ‘King Arthur’ in BR Intercity ‘Swallow’ logo, (I can now remove my tongue from my cheek!)

The SR cattle trucks announced last year have this week also arrived in the shops, once my versions arrive I will post a picture review.  Just to clear up some misunderstanding on what versions have been released in this batch, as information on some retailers websites has been inconsistent due to changes in the information originally supplied / described by Hornby, the following versions are available:

  • R6735 – late SR livery, Bulleid designed version to SR diagram 1530 as introduced in 1947
  • R6735A – late SR livery , Bulleid designed version to SR diagram 1530 as introduced in 1947
    (although it would not doubt have been a while before these ended up in BR livery)
  • R6737 – BR livery  ex SR Maunsell designed version to SR Diagram 1529
  • R6737A – BR livery ex SR Maunsell designed version to SR Diagram 1529

It is still hoped that further livery versions, perhaps the inverse of the above, will be part of the 2017 range, although it should not be beyond the skills of many to re-livery the diagram 1529 version to the SR period.

I also remind readers that the 2016 livery versions of the excellent S15 4-6-0 model have also arrived at retailers namely

  • R3411 – SR 4-6-0 ‘827’ Maunsell S15 Class, Urie style tender – Post war Bulleid black with ‘Sunshine’ lettering
  • R3412 – BR 4-6-0 ‘30842’ Maunsell S15 Class, flat sided tender – BR Black early crest
  • R3413 – BR 4-6-0 ‘30831’ Maunsell S15 Class, Urie style tender – BR Black late emblem

Peco

Following on the recent announcement of their intention to produce 00 bullhead plain track with a more prototypical sleep spacing (bearing in mind that 00 being 16.5mm gauge rather the prototypical 18.83 it is still a compromise that the majority of us modellers accept) Peco also had on display an early mock up / EP of a large radius turnout which certainly looked good. It is my understanding that the geometry will match their existing code 75 streamline turnouts.

Bachmann

No new announcements from Bachmann, as is often the case at Warley, as their 2017 range is planned to be announced on January 8th next year, slightly earlier than their usual March date.

The Ep of the Bachmann ex LBSC H2 Class Atlantic 4-4-2 picture courtesy of A York / BRM

The EP of the Bachmann ex LBSC H2 Class Atlantic 4-4-2 picture courtesy and copyright of A York / BRM

In their usual display cases at the show were a number of Engineering Prototypes of current work in progress this included the first views of the ex London, Brighton and South Coast (LBSC) Brighton H2 Class Atlantic  Engineering Prototype  as seen pictured left. The planned initial releases, although it looks like tooling will allow for future further variations, for the H2 class are as follows:

A further view of the Bachmann H2 EP. Picture courtesy and copyright M Wild / Hornby Magazine

A further view of the Bachmann H2 EP. Picture courtesy and copyright M Wild / Hornby Magazine

31-920 H2 Class Atlantic 4-4-2 No. 2426 ‘St. Alban’s Head’ in Southern Railway olive green livery

31-921 H2 Class Atlantic 4-4-2 No. 32424 ‘Beachy Head’ in BR black livery with early emblem.

Also on display were the EPs of the ex SECR Birdcage Stock that have been seen for a while now.

Trafford Model Centre (TMC)

TMC announced a number of wagon commissions, via Bachmann one of which being one of the 14 Cycle branded PMVs which were introduced in 1952, primarily for use on boat trains, being essentially a modification of ex SR Parcels and Miscellaneous Vans to incorporate hooks inside to hang cycles.

The TMC cycle branded PMV

The TMC cycle branded PMV Picture courtesy and copyright M Wild / Hornby Magazine

Numbers  so converted were 1055,1103,1208,1728, these had 60 hooks presumably for up to 30 cycles, whilst 1057, 1113, 1175, 1282, 1293, 1305, 1314, 1317, 1454, 1882 had 24 hooks each. Number 1317 in addition to the bike symbols on the outside was additionally stenciled, until 1966, for use between Ashford and Cannon Street to convey cycles by manufacturer Normans of Ashford. These vans, except numbers 1175 & 1208 withdrawn in December 1962, had all returned to the general pool by 1969. The version being issued by TMC is number S1282S correctly in BR crimson livery with yellow lettering and the white cycle stencil.

TMC have also commissioned Bachmann to produce the ex LNER /BR 22T double bolster wagon and this is at EP stage

Dapol

There were no new announcements made by Dapol at the show in either 00 or N, as they are looking to get to market all outstanding products currently under development before making any new announcements. The ex London and South Western (LSWR ) B4 0-4-0T announced back in March 2014 is still at the CAD stage. They did have on show some of the results of the alignment of the Dapol and Lionheart ranges in 0 Gauge but none of these were SR related.

Kernow Model Rail Centre

Likewise no new announcements but the Kernow Model Rail Centre has on disaply their EP samples of the PBA/JIA clay tigers, the ex LSWR Gatestock as featured last week on my post here, and also, although GWR origin, the delightful diminutive 1361 class 0-06-0T saddle tanks with all the correct detail variations that they are producing.

Heljan

Back in January this year Heljan announced their intention to release an 07 Class 0-6-0 Ruston & Hornsby Diesel Shunter numbers D2985-D2998 (TOPS numbers 07001-07014).

Heljan EP / 3D sample of their proposed Class 07 shunter (version 1). Picture courtesy and copyright A York / BRM

Heljan 3D printed sample of their proposed Class 07 shunter (version 1). Picture courtesy and copyright A York / BRM

Introduced in 1962 this class of 14 locomotives was designed specifically for use in the Southampton Docks complex on trip and shunting duties. With the decline of traffic within the docks the class was re-assigned to duties in the Eastleigh area before withdrawal and finding further work with a number of industrial companies.
Heljan advise that initially two versions will be produced reflecting ‘as-built’ condition and later modified locos with waist height air brake connections as follows:

Heljan EP / £D sample of their proposed Cl;ass 07 shunter

Heljan  3D printed sample of their proposed Class 07 shunter (version 2). Picture courtesy and copyright A York / BRM

Version 1 non-air braked

2900  D2985 BR Green
2901  D2990 BR Green
2902  D2992 BR Blue
2903  07010  BR Blue

Version 2 air-braked (extra cabinet, air receiver compartment and air pipes (high level)
2910  2993  BR Blue
2911  07005 BR Blue
2912 (07001) Peakstone yellow
2913 (07003) British Industrial Sand white

Proposed for release in 2017, Heljan had a early 3D print mock ups of this model on display.

Note: that the images of Engineering Protptypes sometimes show combinations of components that are mixed and matched and do not necessarily correctly represent the combinations for model variations announced (but can be a hint at possible future variations as well!)

Read Full Post »

If you so wish, wear your poppy with pride today, pause respectfully for two minutes at 11 am this Remembrance day morning, and again on Sunday 13th, remembering all those, both service personnel  and civilian whom have given their lives for the freedom that we all enjoy today, and should you feel so inclined, support the sterling work of the Royal British Legion.

They shall grow not old, as we that are left grow old:
Age shall not weary them, nor the years condemn.
At the going down of the sun and in the morning,
We will remember them.

Locomotive 333 was built originally by the London Brighton and South Coast Railway, designed by Billinton, as an L class 4-6-4 ‘Baltic’ tank. She was given the name Remembrance and became the companies War Memorial engine and carried a plaque with the inscription:

“In grateful remembrance of the 532 men of the L.B.& S.C.Rly. who gave their lives for their country, 1914-1919″

In 1934, under the auspices of Maunsell they were rebuilt as Class N15x (an appropriate Brighton-style suffix) 4-6-0s, and fitted with standard Urie LSWR tenders along with smoke deflectors. Now number 2333 ‘Remembrance’ retained its name, plaque and status within the Southern Railway.

Railway companies across the country and indeed the world lost many staff; not only those drafted into the military services, but also those lost whom continued their duties on the railways keeping the networks up and running, we should honour and remember them all.

Inscribed on James Scott’s Victory Arch, at Waterloo station: “Dedicated to the employees of the Company who fell in the war.”

And just to end this post – the poppy is more than a one time of a year symbol:

I am not a badge of honour, I am not a racist smear,
I am not a fashion statement, to be worn but once a year,
I am not glorification of conflict or of war.
I am not a paper ornament a token,
I am more.

I am a loving memory, Of a father or a son,
a permanent reminder of each and every one. 
I’m paper or enamel, I’m old or shining new,
I’m a way of saying thank you, To every one of you.

I am a simple poppy, a reminder to you all,
That courage faith and honour,
will stand where heroes of all kinds fall.

Read Full Post »

Older Posts »

%d bloggers like this: