Feeds:
Posts
Comments

Posts Tagged ‘Kernow Models’

With a nod to the fact that today, 23rd April, is not only St Georges Day, but also the date on which William Shakespeare is understood to have both been born and this year the 400th anniversary of his death, hence the stretching of a few quotations from his writings (so much more than witterings) in the title.
My last Workbench Witterings #4 post detailed some of the locomotives I have been working on and finishing over the last few weeks and this Workbench Witterings #5 post shows a few more.

The Kernow Model Rail Centre O2 number 225 now weathered

The Kernow Model Rail Centre O2 number 225 now weathered

First up is a pair of the Kernow Model Rail Centre ex LSWR Adams O2 class, 0-4-4Ts in the form of two mainland versions in SR post war black livery. Number 225, Kernow Model Rail Centre release K2105, was already in post 1946 SR black so has been lightly weathered, crew added

O2 Number 225 will be coupled to a Pull Push set using a prototypical screw coupling

O2 Number 225 will be coupled to a Pull Push set using a prototypical screw coupling

(nice and simple to do as the cab roof is designed to be easily removed) and real coal added to the bunker.
She will generally be seen on Fisherton Sarum sharing duties with an M7 class loco coupled to my Pull Push set number 734 or the Kernow Model Rail Centre ex LSWR Gate Stock Pull Push sets when they arrive.

O2 Number 193 on shunting duties

O2 Number 193 for use on shunting duties

Number 193 started life in BR lined black livery as 30193, Kernow Model Rail Centre release K2106,  and repainted into unlined SR livery, unlike 225 is non pull push fitted.
Now backdated to number 193 as well as crew on the footplate and real coal added to the bunker she has been fitted with both red and white lamps at each end on the lamp irons above the buffers, as per a locomotive carrying our shunting duties.

A rear 3/4 view of O2 number 193

A rear 3/4 view of O2 number 193

I have also, carefully using a small razor saw, cut out the cab doors as these were only found on the pull push fitted mainland O2s (although those on the Isle of Wight also had cab doors). To reduce the distance that the tension lock coupling extends past the buffers I also shortened the NEM coupling pocket slightly by cutting off a few millimeters from the front face and holding the tension lock coupling in with a spot of glue.
If you own one these Kernow Model Rail Centre O2s it is also worth checking that the back to backs of the driving wheels are correctly set to 14.5mm, as some have reported issues with haulage which has mainly been due to the back to backs being slightly too wide and simple to rectify by pushing the wheels in slightly, not that mine needed any such adjustment.

A repainted and weathered Bachmann E4

A repainted and weathered Bachmann E4

Next up is a Bachmann ex LBSC Billington E4 Class, 0-6-2T repainted and numbered as 2486. Although ex LBSC locomotives they could seen seen across a wide area of the Southern network. After the closure of the Salisbury Western Region shed in 1950 the ex SR shed was allocated numbers 32506 and 32486.

A rear 3/4 view of a work stained E4 number 2486

A rear 3/4 view of a work stained E4 number 2486

This was reported as being much to the annoyance of the ex WR crews on the duty shunting Fisherton Yard as they preferred their previsous GWR pannier tanks! So modellers licence regarding the bringing date of allocation to Salisbury slightly earlier will apply on Fisherton Sarum. She has been finished in a condition where she could benefit from a good clean and a bit of an overhaul.

Van B number 231

Van B number 231

Finally for now, it is not just locomotives that I have got round to finishing off with a bit of weathering, also seen here are a couple of Non Passenger Carrying Cars.
Firstly the Hornby Bogie Van B that I  mentioned on my Workbench Witterings #1 post after repainted into malachite green a while ago as non stove fitted version number 231.

A weathered Bachmann PLV

A weathered Bachmann PLV

The other is a Bachmann PLV, Parcels Luggage Van (coded PMV in BR parlance) and is still in Maunsell green under the layer of grime.

As I said before I have managed to catch up with finishing a number outstanding projects and these last two Workbench Witterings Posts don’t yet cover them all but I wont bore you with more pictures of weathered black locomotives for now  so watch this space for something different next time around.

Read Full Post »

The Kernow Model Rail Centre have today announced two new model livery releases based on Bachmann models both are now in stock and available for immediate delivery.

Kenow Mk1GUV S86804 with SURBITON - OKEHAMPTON CAR CARRIER roof-boards

Kenow Mk1GUV S86804 with SURBITON – OKEHAMPTON CAR CARRIER roof-boards

The first: for BR Southern Region western section modellers, is a BR Mk1 General Utility Van (GUV) as number S86804 in BR (SR) green livery complete with SURBITON – OKEHAMPTON CAR CARRIER roof-boards. The car carrier train ran between the 18th June 1960 and 12th September 1964 as a way of encouraging holiday traffic to the South West without the hassle of driving all the way there, especially avoiding the then notorious A30! The GUVs had end doors for loading / unloading, and those for car carrying also included hinged flaps to go over the tops of the buffers. They were originally delivered in lined maroon but the Southern Region soon repainted them green as per the Kernow Model Rail Centre release.

The other side of the Kernow Model Centre car carrier service GUV

The other side of the Kernow Model Centre car carrier service GUV

The standard formation of this train was eight (initially 7) of these roof board branded GUVs that could contain up to 32 cars (i.e. three or four cars in each GUV and once loaded the cars were held in position by a securing bar across the front and rear wheels of each car) along with usually three passenger coaches either of Bulleid or BR Mk1 origin. Referencing an Ivo Peters photograph taken in 1964, the three coaches at that time comprised of a Bulleid brake second open, Bulleid Kitchen/Restaurant (although for the first year of operation the resturant car was not provided and was an ordinary coach) and a BR MK1 second open.
The summer 1960 timetable showed the Down train leaving Surbiton, the end loading dock being located in the coal yard, at 8.03 am arriving at Okehampton  12.28 pm.  The GUVs were shunted off the passenger coaches to the loading dock at the sidings known as the ‘military sidings’ just to the west of Okehampton station. The corresponding Up working left Okehampton at 3.55 pm reaching Surbiton at 8.11 pm. The fare for a driver and car was £20 plus £4 13s for additional adult passengers.
This type of service was one of the forerunners of the ‘Motorail’ branded service that was introduced in 1966 lasting until 1995, initially with GUV’s but later often replaced by ‘Carflats’ and many of the GUVs were reassigned to parcels and newspaper traffic.

The model code number for this release is 39-273Z and is priced at £44.95 each

Kernow Class 47 D1670 'Mammoth'

Kernow Class 47 D1670 ‘Mammoth’

The second release is a class 47 locomotive D1670 in two tone green livery, named “Mammoth” as she would have run between 1965 and the early 1970’s. Although primarily a Western Region engine she was the locomotive that worked the inaugural ‘Clayfreighter’ service from Burngullow in Cornwall, then over Southern Region metals to Sittingbourne in Kent conveying clay slurry to Bowaters for the production of paper products.

The model code for this Class 47 is 31-650L and is priced at £149.99 for DC version, £169.99 for DCC fitted or £249.99 for a DCC sound fitted version. There is also an limited period additional special offer of the Bachmann Delabole Slate Presflo wagons Triple Pack being available for an additional £49.99, a saving of £30 per pack, provided they are bought and sent at the same time as ‘Mammoth’.

Read Full Post »

Sometime soon, hopefully around the 20th,  the first variation of the Kernow Model Centre Adams O2 class 0-4-4t should land at Southampton dockside following its journey from China (obviously it will then take a short while to actually get the shipment to the Kernow Model Centre). This initial version to land is their K2105 as mainland version number 255 in Southern Railway black with Bulleid style sunshine lettering, which just by chance is ideal for my own modelling period. The expected arrival dates of the other variations can be read on the Kernow Model Centre website here.  I have been fortunate to have received one of the models that has been sent in advance by air freight for magazine reviews etc.

Kernow Models K2105 number 225 as mainland pull push fitted sits awaiting coaling on Fisherton Sarum

Kernow Models K2105 number 225 in ex works condition sits awaiting coaling on Fisherton Sarum

The O2 class of 60 0-4-4 tank locomotives were introduced in 1889 and despite their size proved powerful and were a development of the T1 class. They were originally intended to replace the ageing Beattie tanks. They ended up generally on branch line use across the ex LSWR network although of course off the mainland the class is most associated with their use on the Isle of Wight railways. Some mainland versions like the Kernow Model Centre number 225 example were fitted with the Southern Railway air control pull-push equipment (although it was later removed from 225 in early BR days).

As regular readers will know I have been involved from the outset providing assistance to the Kernow Model Centre with these models so it would be unfair of me to offer a full detailed critical review as this might be seen by some as being a conflict of interest so I will let you make your own mind up from the photographs here or trade press reviews which are hitting the shelves about now.

225 shows off the fine separately applied detail around the Westinghouse pump for Pull-Push operation. Train spotters bunking the shed are keen to take an picture of Fisherton Sarum's latest arrival...

225 shows off the fine separately applied detail around the Westinghouse pump for Pull-Push operation. Train spotters bunking the shed are keen to take an picture of Fisherton Sarum’s latest arrival…

I will however detail some of the features of the model.  Below the running plate it has a cast metal chassis, a coreless motor with gears driving both main axles (the coupling rods are therefore technically cosmetic), electrical pick up is off all wheels including the pony truck and the chassis also has moulded details such as brake gear, rodding (which might be seen by some as being slightly overscale) and guard irons etc. DCC provision has been made simple; the smokebox door is held in place with two small magnets with the 6 pin DCC socket located behind, making fitting a DCC chip a quick job without having to remove the body at all. Under the removable coal load in the bunker is both space and wiring, already in place, for a small cube sound speaker if required.
My version ran sweetly straight out of the box across all speeds and is capable of hauling at least 6 or 7 coaches with ease.

The body which is tooled for a number of variations has a fully detailed cab (the roof being removable for easy access to add crew), some might say that the cab side sheeting and roof edge is of a slight overscale thickness, but this slight compromise will ensure durability.  Both the front and rear spectacles are flush glazed. The handrails with the exception of those either side of the cab doors are separately applied items. The buffers are plastic mouldings and are not sprung.

By way of a tease number 225 looks at home propelling one the Kernow Model Centre Gate Stock EPs pull-push sets...

By way of a tease number 225 looks at home propelling one the Kernow Model Centre Gate Stock  pull-push sets Engineering Prototypes…

This version being pull-push fitted has the Westinghouse pump (noting it is a smaller size pump than that fitted to the Isle of Wight version for air braking) air tank and associated pipework.
Whilst all the Isle of Wight versions had cab doors fitted not all the mainland versions were so fitted (although as a slight tooling compromise all the models will have), most of the pull-push fitted versions did have them so 225 is correct in this respect.
There is a moulded representation of the copper pipe that was fixed directly to the cab rear plating above the rear spectacles that was drilled with holes to act as a sprinkler allowing crew to dampen down the coal in the bunker to keep the dust down.

Another view of 225 It should be noted that I have not added the buffer beam details supplied with the model yet

Another view of 225 It should be noted that I have not added the buffer beam details supplied with the model yet

A detail pack is provided with each model that includes: buffer beam pipework (including the air control pipes), three link couplings, engine head signal discs and an etched fire irons pack.

Although a simple livery being unlined the ‘Sunshine’ lettering has been nicely applied with the correct slight difference between the lettering and the numerals. She is in ex-works condition hence the bright pipework, steel colour banding around the Westinghouse pump body and also around the cab side cut out, my example will certainly be weathered in due course.

I hope that those whom have ordered these models will feel it has been worth the wait, I certainly think she looks the part. As hinted at above the model looks good paired with the forthcoming ex LSWR Gate Stock Pull Push sets also being produced by the Kernow Model Centre, more details are available here (note that there are a number of corrections still to be made to these Engineering Prototypes, and the driving coach and trailer car illustrated above are from a mix of two sets).

Read Full Post »

At  their annual Collectors Club event, this year held at the Gloucestershire Warwickshire Railway, last Saturday, Bachmann announced their intention to produce Class 117 and 121 Suburban DMUs, along with a Limited Edition E4 for the Collectors Club members.

An example of the Class 117 as preserved on the Gloucestershire and Warwickshire Railway

An example of the Class 117 as preserved on the Gloucestershire and Warwickshire Railway

More information about this release can be read on the Bachmann website here. Some of you will remember that The Kernow Model Centre announced their intention to produce this family of Western Region suburban DMUs at Warley last year.  In fact they had already laser scanned a Class 117 and had completed their initial research.  Following meetings with Bachmann after the Warley show at Warley it became clear Bachmann were also working on this model.  The Kernow Model Centre had previously said that they have no interest in “taking on” a major manufacturer and so immediately offered their research and laser scan data to Bachmann and they have been working with them on this project ever since.  Although primarily based on the Western Region the Class 117 units could be seen on Southern Region metals on Reading – Guildford services.
In addition to the main Bachmann releases there will also be a version of both classes exclusive to the Kernow Model Centre in the GW150 celebration Chocolate and Cream livery.
The Kernow model Centre have also advised that they have not forgotten about the Class 116 and Class 118 and further news about these will be announced  in due course (but with no current timescale for such an announcement).

E4 as Birch Grove

E4 as Birch Grove

One of the benefits of the being a member of the Bachmann Collectors club is the fact they produce limited edition model exclusively for club members. One of the models announced and available for purchase at the event on Saturday was a version of the ex London

Another view of E4 as Birch Grove

Another view of E4 as Birch Grove

Brighton and South Coast Railway (LBSCR) E4 class 0-6-2t in LBSC Umber livery as Birch

Grove a livery she was also regularly seen carrying in preservation on the Bluebell Railway. This will prove to be a popular model amongst club members I am sure.

I was fortunate to attend this event as a guest of Bachmann whom I thank for their hospitality provided to myself and my other media friends.

 

 

Read Full Post »

The humble brake van was an every part of the railway scene up until the advent of continuous brakes for most freight stock in the early 1970’s.  They initially served two purposes: to provide additional braking for ‘unfitted’ goods trains and of course somewhere for the guard to travel; later vans were also ‘fitted’ for working on such vacuum brake fitted formations. They were a weighted wagon equipped with a hand internally operable brake acting on all wheels they ranged from the 4 or 6 wheel type to sometimes 8 wheels and also bogie types. The ‘fitter’ versions having vacuum cylinders and able to operate the brakes on the fitted stock that make up the train (some vans were simply through piped to allow continuity of the braking system without being able to actually operate it, in such such cases just the hand brake was available for use.

The guard’s accommodation often included one or two verandas, or closed ends with windows and many also incorporated side lookouts or duckets to allow a guard to look forwards along the side of the train.

This post follows on from the announcement by Kernow models of their ready to run version of the ex LSWR 10T Road van to diagram 1541 and will look at a few kit built examples of brake vans that can be found running on Fisherton Sarum.

Dia 1545 Road Van

Dia 1545 Road Van

The ex LSWR 10T road van mentioned above was known as a road van as in addition to the guard’s accommodation and single veranda it has side opening doors on each side and the van could also be used the carrying of goods. This van is currently available in resin kit form from The Smallbrook Studio.  To the left can be be seen my model of the  20T Diagram 1545 Road Van also a resin kit form from The Smallbrook Studio. As well as being heavier that the Diagram 1541 road van  they were also larger, had a veranda at both ends and side duckets.

Dia 1543 Van, still requires completion of transfers and matt varnish before being complete

Dia 1543 ex LSWR 20T Brake Van, still requires completion of transfers and matt varnish before being finished

Staying with the LSWR seen left is my model  20T brake van to diagram 1543. This is built from a Jedenco / Falcon Brass  etched brass kit. 75 of this this type of van were built between 1915 and 1921.  They were known to staff as ‘new vans’ a name which they kept well into the 1950’s!

Dia 1748 ex SECR Ballast Plough

Dia 1748 ex SECR Ballast Plough Brake Van

Moving further east, I have a couple of ex SECR brake vans firstly is one that is perfectly at home on the ex LSWR metals as it is ex SECR 20T Ballast Plough brake van, diagram 1748, in the civil engineers fleet. The first lone prototype was built in 1914 with 3 more being built by the SR in 1932, a further 8 with slight detail differences were built in 1949.  In addition to the brakes it also had ploughs to rake freshly applied ballast from hoppers in the same train. These ploughs could be raised or lowered as required from inside the van. This particular model, also built from a Jedenco etched brass kit, has already featured on these pages here along with its companion rake of 40t Ballast hoppers.

Dia 1559 ex SECR 'Dancehall' Brake Van, yes must properly fix that handrail!

Dia 1559 ex SECR ‘Dancehall’ Brake Van, yes must properly fix that handrail!

Finally for this post we see an ex SECR ‘Dancehall’ 25T brake van to Diagram 1559 First introduced in 1921., The SR built a further batch between 1923 and 1927 but these had deeper 15” instead of 12” channel underframes and were given the diagram number 1560. These vans gained the nickname ‘Dancehall’ due to the large amount of space inside them. They were long lived vans surviving, albeit modified, in departmental use right up until the 1970’s. This is built from a Cambrian Models plastic kit. 

There are of of course other SR related kits and ready to run brake vans available and some of these may well feature in future posts, although my review of the Bachmann RTR 25T ‘Pill box’ brake van can be read here. 

Read Full Post »

The Kernow Model Rail Centre have today announced that they have commissioned DJ Models to produce the LSWR 10T Diagram 1541 Road Van in OO Gauge as an exclusive model with the tooling owned by Kernow Model Rail Centre.

The Road Van used for Scanning on the Isle of Wight Railway

No. 56046 that was scanned on the Isle of Wight Railway

First introduced in 1886 they were later classed as SR Diagram 1541.  Almost 500 of these were built between then and 1905 making them the most numerous LSWR Goods Brake Van.  Brake Vans with side doors through which parcels or other goods could be loaded were known as road vans.

The CAD for this model is virtually complete

The CAD for this model is virtually complete

The prototype was laser scanned at the Isle of Wight Steam Railway at the same time that they scanned the  ex LWSR Adams O2 Class locomotive. 

I have been working with Kernow Model Rail Centre for a while now on the research and development of this model.

The latest cads, seen left,  are almost complete with just a few very minor tweaks required before tooling can commence.

A further CAD view

A further CAD view

The model joins their growing portfolio of LSWR models and will be ideal for use with their ex LSWR Adams O2 Class locomotive as they will be producing mainland and Isle of Wight numbered vehicles.

The models will be £24.99 each and no deposits are required.

The initial variations are as follows:

  • SB003A Number 56046 in SR Brown livery with red ends.  (Isle of Wight)
  • SB003B Number 12424 in LSWR Brown livery with red ends. (Mainland)
  • SB003C Number DS 54538 in BR Bauxite livery with “RETURN TO THREE BRIDGES” branding. (Mainland)
  • SB003D  Number S56055 in BR Bauxite livery. (Isle of Wight)
  • SB003E Number S56050 in BR Grey livery. (Isle of Wight)
  • SB003F Number S54730 in BR Grey livery. (Mainland)
  • SB003G Number S54656 in BR Bauxite livery. (Mainland)
  • SB003H Number 54611 in SR pre-1936 Brown livery with red ends. (Mainland)
  • SB003J Number 54551 in SR post-1936 Brown livery. (Mainland)
  • SB003K Number 56045 in SR post-1936 Brown livery. (Isle of Wight)

Further product and ordering information can be found on the Kernow Models Website here.

Read Full Post »

Kernow Model Centre has today announced the following:

Following many requests we have decided to produce two more versions of our award-winning Beattie Well Tank models.  We will be using the same upgraded coreless motor that will be incorporated into our Adams O2 models and the economies of scale from this mean we can keep the price of this batch of Well Tanks to £94.99 for pre-orders.  The Well Tank will be produced in the same factory and by the same people in China as previously, which is also the same factory producing our Adams O2 models.  We will be making these Well Tank models to order and guarantee to supply every order placed by 31st August this year.  At this stage we will decide on the final quantity to be produced but there will be at least 250 of each version.  As always, no deposits are required and we do not charge for the models until we are about to despatch the orders.  We will be offering DCC Fitted versions which will have the Gaugemaster DCC 23 Decoder fitted.  We expect delivery by the end of this year and as soon as the models are on the way to us the price will rise to £99.99 for new orders.   See more information on our website

The Kernow model of  30586 in early British Railways Livery with Bulleid Sunshine lettering will be as per my own repainted version

The Kernow model of 30586 in early British Railways Livery with Bulleid Sunshine lettering will be as per my own repainted version

K2056 DJ Models 2-4-0WT Beattie Well Tank Steam Locomotive number 30587 BR Late Crest £99.99 (£94.99 pre-orders)
K2056DC DJ Models 2-4-0WT Beattie Well Tank Steam Locomotive number 30587 BR Late Crest DCC Fitted £119.99 (£114.99 pre-orders)
K2057 DJ Models 2-4-0WT Beattie Well Tank Steam Locomotive number 30586 Early British Railways 1948 livery with Sunshine lettering  £99.99 (£94.99 pre-orders)
K2057DC DJ Models 2-4-0WT Beattie Well Tank Steam Locomotive number 30586 Early British Railways 1948 livery with Sunshine lettering DCC Fitted £119.99 (£114.99 pre-orders)

Read Full Post »

« Newer Posts - Older Posts »

%d bloggers like this: